Highlight
It helps to remove the glue on the window after removing the film. This chemical is suitable for use in removing the glue in the rear window with defroster lines. The smell is not acrid, not Thinner. It can be used to wipe the car console and remove the glue stuck in the window. In which the solution will react with the glue causing the glue to melt, smell not pungent, not Thinner. It can be used to wipe clean the car console.
Information
Item weight
Barcode
Created time
Last updated on
Item description
Use
1.
Remove the film out from the window. (If the film is broken into small pieces, see how to bake the film below)
2.
Spray the solution to the adhesive thoroughly enough to moisten.
3. Leave for a while (3-5 minutes) when the glue begins to soft,
use plastic squeegee or scraping equipment to scrape the glue.
4.
If there is still the glue residues, can be repeatedly sprayed and scraped off.
5.
When the glue residue is gone, it can be repeatedly cleaned with the slip solution.

Warning
1. Do not inhale directly.
2. Do not eat.
3.
Avoid direct contact with eyes.
4. During use, the door should be opened to release the smell.
5.
Should find a paper or a cloth to place the car console to prevent corrosion.
6.
If the chemical touches the car console and marks it. It is caused by a solution to remove dirt stains on the console. Can use the solution to spray on a clean cloth and wipe around of the areas.

Techniques for baking film (special)
If the film is broken into small pieces and cannot be peeled off into sheets, but other windows can be scraped with a scraper. However, only rear windows defroster lines or window buildings with a coating on the outer glass surface may not be able to use the scraping blades directly. Therefore, special techniques may be used together with glue remover:
1. Use a thin black garbage bag,
cut into sheets with making the pattern from the outside. (Like a film cutting)
2.
Spray the glue remover on the film without peeling off the film.
3.
Take the black garbage bag that has been cut and paste it to the window contained solution by placing the inside of the black garbage bag to paste. Then use a hand to press it smooth as much to the window as possible. (Should not use a squeegee or other things that heavy to press because it will cause the solution to flow out of the film too much.)
4.
Bring the black bag in step 3 to expose to sunlight which duration will depend on the heat of the sunlight. It usually takes about 5 minutes. If there is no sunlight, can use the heat gun blow into the outside window thoroughly.
5.
From step 4, may have to keep checking by trying to gouge the edges that the solution has evaporated through the film's surface or not. Because if through the film layer already, the film can be peeled off as a sheet together with a black garbage bag immediately. And should be careful not to let it dry for too long, this will cause the glue to dry on to the window, making the film unable to peel off as a sheet.
T3-002 1 Liter glue remover
Conditions
Tags

How to pay

Select the easiest way to directly pay to the seller. For any queries, please contact us

Transfer Money to Bank Account
ธนาคารกรุงเทพ จำกัด (มหาชน) Bank branch/locationสาธุประดิษฐ์ Current
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านThai Window Film Shop
Thai Window Film Shop
นำเข้าและจัดจำหน่ายฟิล์มกรองแสง - ฟิล์มนิรภัย - ฟิล์มตกแต่งภายใน ทั้งฟิล์มติดรถยนต์และฟิล์มติดอาคาร รวมถึงเครื่องมือเครื่องใช้ในการติดตั้งฟิล์มทุกชนิด
Mobile number : 02-444-3044
E-mail : thaiwindowfilmshop@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me